[tab title=”Product Features”]
Easy to use:
No need to add any liquid or pre-cooling,simply put your samples directly into theFreezerCell™, and keep all your samples in a -80℃ low temperature environment.
Easy open lid, and you can hold the FreezerCell™ directly from the -80℃ freezer without any concern of rostbite
to your fingers.
Transfer the samples conveniently, you can remove the whole box or an individual sample at any
No maintenance costs, no need to replace anything. Once you purchase the FreezerCell™,it will serve you for years to come.
Reuse the FreezerCell™ over and over,5-minute turnaround
The FreezerCell™ foot print is minimal, and won’t use up a lot of freezer space.
Higher cell survival rate:
Cooling rate consistency is very good, freeze an individual experimental, or a full load. The cooling rate on each sample is the same every
Simply put the samples to be frozen into FreezerCell™, and apply the lid. The FreezerCell™ must be placed
in a -80℃ environment for at least 3 hours, during the cooling period, do not opened during the cooling
process. Aer the cooling processing is complete, the sample can be removed and transferred to liquid
nitrogen tank for long term storage. If you need to reuse the FreezerCell™ quickly, simply open the lid and
remove the tray, let them both return to room temperature, then you are ready to use again.